DTE Energy (DTE Electric) commercial electricity rates in Michigan

• Average commercial price, 202513.93¢per kWh, customers on bundled service
• vs Michigan average−3.8%state commercial average 14.48¢
• Commercial customers215,6222nd largest of 24 in Michigan
• Average use6,414 kWha month per commercial customer
• Average bill$893a month per commercial customer
• Since 2015+41%from 9.89¢ per kWh
• Outages151 mina year per customer · US average 124

DTE Energy (DTE Electric) is an investor-owned utility serving 25 counties in Michigan. Among the 24 Michigan utilities in EIA’s 2025 sales data with 500 or more commercial customers, it is the 2nd largest, with about 38% of the state’s commercial customers. EIA lists it as DTE Electric Company.

DTE Energy commercial electricity prices, 2015 to 2025

In 2015 DTE Energy billed its commercial customers on bundled service an average of 9.89¢ per kWh. In 2025 the figure was 13.93¢, so it rose 41% over 10 years. The average for all commercial customers in Michigan rose 37% over the same period. The highest year was 2024, at 14.23¢. Between 2024 and 2025 it fell 2.1%.

Average use and average bill are the utility’s commercial sales and revenue divided by its commercial customers and by twelve. The bill is an all-in figure: energy, delivery, demand and fixed charges together. A few very large customers pull both averages up, so most businesses use and pay less than the average.

DTE Energy customers who buy their energy from a supplier

In 2025, 15% of the commercial kWh DTE Energy delivered went to customers buying their energy from a competitive supplier, and 2% of its commercial customers did so. The share by kWh is the larger because the businesses that shop tend to be the larger ones. DTE Energy bills those customers for delivery only, at an average of 3.52¢ per kWh, which is the part of a bill that no supplier can change.

Residential, commercial and industrial prices at DTE Energy

In 2025 the average commercial price at DTE Energy was 31% below the residential figure and 77% above the industrial one. Larger customers take power at a higher voltage and use it more steadily, so at most utilities the average falls from residential to commercial to industrial. Which class an account falls in is the utility’s decision, and the line between commercial and industrial is drawn differently from one utility to the next.

The customers who buy their energy from a supplier are counted separately, and DTE Energy bills them for delivery alone:

How DTE Energy’s commercial rates are set

DTE Energy is investor-owned, so its rates are set in cases before the Michigan Public Service Commission and published in a tariff, which is a public document. A commercial account is billed on a rate schedule, chosen by the size of the account and the voltage it takes power at, and a schedule usually combines a fixed monthly charge, a charge per kWh and, above a certain size, a demand charge on the highest rate of draw in the month. The schedule code is printed on the bill. What a business in Michigan can and cannot choose is on the Michigan page.

Meters, time-varying rates and net metering at DTE Energy

EIA counts 216,926 commercial meters at DTE Energy in 2025, and 216,824 of them (more than 99%) are advanced meters (AMI), which record use at least hourly and report it to the utility at least daily. Of the rest, 102 are standard meters. An advanced meter is what makes interval data possible, and interval data is what shows when a building’s peak demand happens.

At DTE Energy, 32 commercial customers were on a time-varying rate in 2025, about 0.0% of its commercial customers. A time-varying rate charges more in some hours than in others, so when a business uses power matters as well as how much. The kinds DTE Energy reports offering commercial customers are time-of-use pricing and critical peak pricing.

EIA records 625 commercial net-metered generating systems at DTE Energy in 2025, with 20.3 MW of capacity between them: about 2.9 for every 1,000 commercial customers. Net metering credits a customer for power its own system sends to the grid; the terms are in the utility’s tariff.

How reliable is DTE Energy’s electric service?

DTE Energy customers went without power for an average of 151 minutes in 2025, excluding major storms, with about 1.07 interruptions per customer. The average across U.S. utilities reporting the same way is 124 minutes. With major storms counted the figure was 192 minutes. These are averages over every customer of every class, so they describe the system and not any one street.

Where DTE Energy serves

EIA records DTE Energy serving customers in 25 Michigan counties: Bay, Branch, Delta, Genesee, Gladwin, Gratiot, Huron, Ingham, Isabella, Lapeer, Lenawee, Livingston, Macomb, Midland, Monroe, Montcalm, Oakland, Presque Isle, and 7 more. A county can be shared between utilities, so this does not tell you who serves a given address. The utility that serves an address is the one named on its bill.

EIA lists MISO as its balancing authority. MISO is one of the organised wholesale markets, which run the grid and the wholesale power market across their area.

Other utilities in Michigan

The average each billed its commercial customers in 2025. The Michigan page has the state’s own figures and every utility with 500 or more commercial customers.

• Consumers Energy (16.22¢)
• Indiana Michigan Power (12.34¢)
• Great Lakes Energy (17.53¢)
• Lansing Board of Water & Light (16.43¢)

What these figures can and cannot tell you

• They are averages over every commercial customer. A utility whose commercial customers are mostly large averages fewer cents per kWh than one serving mostly small shops, so a lower figure can mean larger customers and not a lower rate.
• They are not a rate schedule. None of these figures is a charge printed in DTE Energy’s tariff, and nothing here works out a bill from one. The tariff index lists the utilities whose filed schedules are quoted on this site.
• They are annual and final. EIA publishes utility figures once a year. The Michigan page carries the state’s trailing 12 months, which is more recent and still preliminary.
• Bundled and delivery-only are different customers. The two prices describe different parts of the bill and are never added together or averaged.

For one building, the cost estimator gives a range by building type, size and state, and price by utility sets every utility side by side. Commercial vs residential vs industrial compares the classes in every state.

Data: every year of these figures, for this utility and every other with a page, is in one CSV, free to use with credit to the U.S. Energy Information Administration and this site. To cite this page: DTE Energy commercial electricity rates, CommercialElectricityRates.com, from EIA Form EIA-861 final 2025 data.

Common questions about DTE Energy

What is the average commercial electricity rate at DTE Energy?

DTE Energy billed its commercial customers on bundled service in Michigan an average of 13.93¢ per kWh in 2025, according to the U.S. Energy Information Administration. That is 3.8% below the Michigan commercial average of 14.48¢. It is the utility’s commercial revenue divided by its commercial sales, so it describes the whole class and is not the rate on any one schedule.

How much is the average commercial electric bill at DTE Energy?

About $893 a month in 2025, on average use of about 6,414 kWh a month. That is DTE Energy’s commercial revenue divided by its 211,463 commercial customers. A few very large accounts pull the average up, so most businesses pay less than this.

Have DTE Energy’s commercial electricity rates gone up?

The average DTE Energy billed commercial customers rose 41% between 2015 and 2025, from 9.89¢ to 13.93¢ per kWh. The Michigan commercial average rose 37% over the same period.

How reliable is DTE Energy’s electric service?

DTE Energy customers averaged 151 minutes without power in 2025, excluding major storms, against a 124-minute average for U.S. utilities reporting the same way (EIA).

Does DTE Energy use smart meters for businesses?

EIA counts 216,824 advanced (AMI) meters among DTE Energy’s 216,926 commercial meters in 2025, which is more than 99%. An advanced meter records use at least hourly, which is what makes interval data and time-varying rates possible.

Is this the rate my business will pay DTE Energy?

No. It is an average over every commercial customer, from a corner shop to a campus. What one business pays depends on its rate schedule, how much it uses and how hard it draws at its peak. The schedule code is printed on the bill, and the schedule itself is in DTE Energy’s tariff.