MidAmerican Energy commercial electricity rates in Illinois

• Average commercial price, 20257.49¢per kWh, customers on bundled service
• vs Illinois average−43%state commercial average 13.10¢
• Commercial customers12,8303rd largest of 21 in Illinois
• Average use3,889 kWha month per commercial customer
• Average bill$291a month per commercial customer
• Since 2015Levelfrom 7.51¢ per kWh
• Outages143 mina year per customer · US average 124

MidAmerican Energy is an investor-owned utility serving 3 counties in Illinois. Among the 21 Illinois utilities in EIA’s 2025 sales data with 500 or more commercial customers, it is the 3rd largest, with about 2.0% of the state’s commercial customers. EIA lists it as MidAmerican Energy Co.

MidAmerican Energy commercial electricity prices, 2015 to 2025

In 2015 MidAmerican Energy billed its commercial customers on bundled service an average of 7.51¢ per kWh. In 2025 the figure was 7.49¢, so it was unchanged over 10 years. The average for all commercial customers in Illinois rose 45% over the same period. The highest year was 2017, at 8.21¢. Between 2024 and 2025 it fell 1.1%.

Average use and average bill are the utility’s commercial sales and revenue divided by its commercial customers and by twelve. The bill is an all-in figure: energy, delivery, demand and fixed charges together. A few very large customers pull both averages up, so most businesses use and pay less than the average.

MidAmerican Energy customers who buy their energy from a supplier

In 2025, 2% of the commercial kWh MidAmerican Energy delivered went to customers buying their energy from a competitive supplier, and 0% of its commercial customers did so. The share by kWh is the larger because the businesses that shop tend to be the larger ones. MidAmerican Energy bills those customers for delivery only, at an average of 2.04¢ per kWh, which is the part of a bill that no supplier can change.

Residential, commercial and industrial prices at MidAmerican Energy

In 2025 the average commercial price at MidAmerican Energy was 25% below the residential figure and 46% above the industrial one. Larger customers take power at a higher voltage and use it more steadily, so at most utilities the average falls from residential to commercial to industrial. Which class an account falls in is the utility’s decision, and the line between commercial and industrial is drawn differently from one utility to the next.

How MidAmerican Energy’s commercial rates are set

MidAmerican Energy is investor-owned, so its rates are set in cases before the Illinois Commerce Commission and published in a tariff, which is a public document. A commercial account is billed on a rate schedule, chosen by the size of the account and the voltage it takes power at, and a schedule usually combines a fixed monthly charge, a charge per kWh and, above a certain size, a demand charge on the highest rate of draw in the month. The schedule code is printed on the bill. What a business in Illinois can and cannot choose is on the Illinois page.

Meters, time-varying rates and net metering at MidAmerican Energy

EIA counts 11,757 commercial meters at MidAmerican Energy in 2025 and reports no advanced (AMI) meters among them. Of those, 11,737 are automated-reading (AMR) meters, which send a reading to the utility for billing only, and 20 are standard meters. Without an advanced meter a business generally has no interval data, so its peak demand is read from the meter’s own register.

At MidAmerican Energy, 202 commercial customers were on a time-varying rate in 2025, about 1.6% of its commercial customers. A time-varying rate charges more in some hours than in others, so when a business uses power matters as well as how much. The kinds MidAmerican Energy reports offering commercial customers are time-of-use pricing.

EIA records 94 commercial net-metered generating systems at MidAmerican Energy in 2025, with 6.90 MW of capacity between them: about 7.3 for every 1,000 commercial customers. Net metering credits a customer for power its own system sends to the grid; the terms are in the utility’s tariff.

How reliable is MidAmerican Energy’s electric service?

MidAmerican Energy customers went without power for an average of 143 minutes in 2025, excluding major storms, with about 1.47 interruptions per customer. The average across U.S. utilities reporting the same way is 124 minutes. With major storms counted the figure was 304 minutes. These are averages over every customer of every class, so they describe the system and not any one street.

Where MidAmerican Energy serves

EIA records MidAmerican Energy serving customers in 3 Illinois counties: Henry, Mercer, Rock Island. A county can be shared between utilities, so this does not tell you who serves a given address. The utility that serves an address is the one named on its bill.

EIA lists MISO as its balancing authority. MISO is one of the organised wholesale markets, which run the grid and the wholesale power market across their area.

Other utilities in Illinois

The average each billed its commercial customers in 2025. The Illinois page has the state’s own figures and every utility with 500 or more commercial customers.

• ComEd (15.13¢)
• Ameren Illinois (14.60¢)
• City Water, Light and Power (14.48¢)

What these figures can and cannot tell you

• They are averages over every commercial customer. A utility whose commercial customers are mostly large averages fewer cents per kWh than one serving mostly small shops, so a lower figure can mean larger customers and not a lower rate.
• They are not a rate schedule. None of these figures is a charge printed in MidAmerican Energy’s tariff, and nothing here works out a bill from one. The tariff index lists the utilities whose filed schedules are quoted on this site.
• They are annual and final. EIA publishes utility figures once a year. The Illinois page carries the state’s trailing 12 months, which is more recent and still preliminary.
• Bundled and delivery-only are different customers. The two prices describe different parts of the bill and are never added together or averaged.

For one building, the cost estimator gives a range by building type, size and state, and price by utility sets every utility side by side. Commercial vs residential vs industrial compares the classes in every state.

Data: every year of these figures, for this utility and every other with a page, is in one CSV, free to use with credit to the U.S. Energy Information Administration and this site. To cite this page: MidAmerican Energy commercial electricity rates, CommercialElectricityRates.com, from EIA Form EIA-861 final 2025 data.

Common questions about MidAmerican Energy

What is the average commercial electricity rate at MidAmerican Energy?

MidAmerican Energy billed its commercial customers on bundled service in Illinois an average of 7.49¢ per kWh in 2025, according to the U.S. Energy Information Administration. That is 43% below the Illinois commercial average of 13.10¢. It is the utility’s commercial revenue divided by its commercial sales, so it describes the whole class and is not the rate on any one schedule.

How much is the average commercial electric bill at MidAmerican Energy?

About $291 a month in 2025, on average use of about 3,889 kWh a month. That is MidAmerican Energy’s commercial revenue divided by its 12,771 commercial customers. A few very large accounts pull the average up, so most businesses pay less than this.

Have MidAmerican Energy’s commercial electricity rates gone up?

The average MidAmerican Energy billed commercial customers was unchanged between 2015 and 2025, from 7.51¢ to 7.49¢ per kWh. The Illinois commercial average rose 45% over the same period.

How reliable is MidAmerican Energy’s electric service?

MidAmerican Energy customers averaged 143 minutes without power in 2025, excluding major storms, against a 124-minute average for U.S. utilities reporting the same way (EIA).

Is this the rate my business will pay MidAmerican Energy?

No. It is an average over every commercial customer, from a corner shop to a campus. What one business pays depends on its rate schedule, how much it uses and how hard it draws at its peak. The schedule code is printed on the bill, and the schedule itself is in MidAmerican Energy’s tariff.